Archive

Archive for 四月, 2017

Linux操作系统虚拟机(ESXi、VMware Workstation等)MAC地址变化后网卡无法启动-转

原始文章:
http://iknow.lenovo.com/detail/dc_148601.html

虚拟机MAC改变后,无法启动,并报错:“Device eth0 does not seem to be present”
出现该问题,是由于MAC地址变更后,操作系统仍然保留原来MAC地址作为eth0,并且将新的MAC地址识别为新的网卡导致的,可以删除文件“/etc/udev/rules.d/70-persistent-net.rule”中老MAC的信息,并把新MAC中的eth1改成eth0,通过start_udev重新加载udev,然后重启网卡恢复:“service network restart”

Deploy Samba on OpenWRT

买了linksys wrt1200ac很久了,之前只是装了一个openwrt+默认配置,也没启用什么特别功能,感觉还算稳定。不过现在想听一些下载下来的广播,但又不想总是开着PC,所以突然想把这些音频挪到没用的u盘里,并挂在openwrt中,这样任何设备都可以访问了,还剩资源:)

定制OpenWRT

1. 安装中文包

root@OpenWrt:~# opkg update <<< 每次重启后需要缓存安装包列表,这样才能search到所有可用的包
root@OpenWrt:~# opkg list |grep zh-cn <<< 学会如何查找相应的包
root@OpenWrt:~# opkg install luci-i18n-base-zh-cn <<< 安装中文包

2.安装luci的主题

默认只有一种,在默认更新源里,加上默认的一共有4个,最后我还是选择了默认的 -_-

root@OpenWrt:~# opkg list |grep -i theme
luci - git-16.018.33482-3201903-1 - Standard OpenWrt set including full admin with ppp support and the default Bootstrap theme
luci-theme-bootstrap - git-16.018.33482-3201903-1 - Bootstrap Theme (default)
luci-theme-freifunk-bno - git-16.018.33482-3201903-1 - Freifunk Berlin Nordost Theme
luci-theme-freifunk-generic - git-16.018.33482-3201903-1 - Freifunk Generic Theme
luci-theme-openwrt - git-16.018.33482-3201903-1 - LuCI OpenWrt.org theme
 完整阅读

Excel 小技巧

在处理工作时,常常遇到统计log,但如何高效的统计,常常需要度娘,而且查起来也很麻烦,所以统计到blog里,下次可以统一查阅:

1. Excel中两列数据,找出重复项

参考文章请查看:
https://zhidao.baidu.com/question/546059662.html
分别对两行建立条件公式,选中A列,条件“=COUNTIF(B:B,A1)>0”;选中B列,条件“=COUNTIF(A:A,B1)>0”,如下所示:



完整阅读

INSTALL CISCO WAE 6.4.5

Introduction

After installed Centos 6.7 for CISCO WAE, I found python version is 2.6 that is much older, and I need ansible1.9, but Centos default upgrade to ansible2.2… in order to easy management ansible1.9 that is python package, I plan to install PIP. From official website, suggest not use 2.6 under pip, so I need to upgrade python to 2.7 too.

But I found WAE use 2.6 after I succeed upgrade python to 2.7…Summarized the totally steps that will help me review in future.

Upgrade Python

After checked from follow link, python 2.7.9 integrate pip, so install this version 🙂
https://pip.pypa.io/en/latest/installing/

1. Install some package that require by python

python have multi dependencie

[root@wae ~]# yum install gcc
[root@wae ~]# yum install openssl-devel

2. Install python 2.7.9

[root@wae ~]# wget http://python.org/ftp/python/2.7.9/Python-2.7.9.tgz
[root@wae ~]# mv Python-2.7.9.tgz /opt/
[root@wae ~]# cd /opt/
[root@wae opt]# tar -xvf Python-2.7.9.tgz 
[root@wae opt]# cd Python-2.7.9
[root@wae Python-2.7.9]# ./configure --prefix=/usr/local/python2.7
[root@wae Python-2.7.9]# make
[root@wae Python-2.7.9]# make install

完整阅读