Archive

Archive for 七月, 2019

Activate XRv9k Smart License by SSMS

At last article Direct activate XRv9k Smart License, I summarized how to direct activate XRv9k Smart License. Before doing that, XRv9k must be able to access the Internet(Cisco License web). Same as follow picture “Direct Deployment”. But some customers couldn’t let devices access the internet due to security. So we must activate the smart license in another way. That is Smart Software Manager satellite, same as “Mediated Deployment” in the following picture.

完整阅读

0

Upgrade/Install Packages in eXR

Check now version, due to now version include multi packages, so you must include those packages when you upgrade:

RP/0/RP0/CPU0:R31#show ins ac sum
Fri Mar 29 02:35:01.477 UTC
    Active Packages: 9
        ncs5500-xr-6.6.1 version=6.6.1 [Boot image]
        ncs5500-isis-2.1.0.0-r661
        ncs5500-li-1.0.0.0-r661
        ncs5500-mcast-2.1.0.0-r661
        ncs5500-mpls-2.1.0.0-r661
        ncs5500-mpls-te-rsvp-3.1.0.0-r661
        ncs5500-ospf-2.0.0.0-r661
        ncs5500-mgbl-3.0.0.0-r661
        ncs5500-k9sec-3.1.0.0-r661

Check whether harddisk/disk have enough space, please remove unuse file and tem file in disk/harddisk

完整阅读

0

Deploy TRex in Centos7.4

TRex based on DPDK, have high performance for traffics generator scenario. TRex has two deployment scenarios, one is Stateless mode, another is Server/client mode. How different for them? As follow pic. Btw, TRex has a GUI tool that can easy config traffic pattern, but that only support in Stateless mode. For Server/Client mode, only CLI (you can reference “Linux SRv6实战 (第三篇) 多云环境下Overlay(VPP) 和Underlay整合测试 ” that use Server/Client mode). For the article, only focus on stateless mode and GUI tool. 

完整阅读

0
blonde teen swallows load.xxx videos