ASR9k Split-horizon Summary

对于ASR9k的split-horizon简单总结如下:

注:ASR9k不同于76,split-horizon不能disable;它一共分3组,group 0,1和2,每组的定义不一样。

  • 默认所有AC都属于group 0,group 0比较特殊,其中的AC都可以互访
  • 所有PW都属于group 1,group 1中的member不能互访,但能与group0或group 2互访
  • 不论在AC还是PW上配置split-horizion后,都会属于group 2,group2中的member不能互访,但能与group0或group1互访

下面是Xander总结的(https://supportforums.cisco.com/thread/2213114 ):

Three SHG groups are defined for VPLS(SHG0,SHG1 and SHG2). By default, all the 
bridge-ports( AC or PW ) come in SHG0. When a Split horizon-group is configured 
under the Bridge-port( either under AC or PW) they come in SHG2. 
PWs defined under VFI come in SHG1. 
By definition, Bridge-ports in same SHG(SHG1 and SHG2) won't talk to each 
other ( this is not applicable for SHG0 though ).

SHG0 --- > SHG0,SHG1 and SHG2
SHG1 --- > SHG0 and SHG2
SHG2 ----> SHG0 and SHG1
本文出自 Frank's Blog

版权声明:


本文链接:ASR9k Split-horizon Summary
版权声明:本文为原创文章,仅代表个人观点,版权归 Frank Zhao 所有,转载时请注明本文出处及文章链接
你可以留言,或者trackback 从你的网站

留言哦

blonde teen swallows load.xxx videos